• Head20-16 Higashi-kojiya 1-chome, Ota City, Tokyo 144-0033 Japan


SuperSeriesNType

SUPER-Series N TypeN Type

SuperSeriesNType

This is the standard type machine that enables simultaneous works on two shafts from a single motor drive by combining a pulley, cam and reduction gear.
The screw cutting failure detection mechanism by sequencer control is mounted as the standard.
Although the number of revolution per stroke (one revolution of cam) in the fabrication process is fixed, it is possible to change the
setting by using a hardware type element such as change of the pulley belt or moderation ratio.
The most efficient screw cutting process became possible now by restricting any useless factors to the utmost limit.

Select by shape of nut

Hex/Square nut
Hex/Square nut
SUPER-N Type
Range of screw processing
SUPER-3N Hex nut
M6~M12
Square nut
M6~M10
SUPER-5N Hex nut
M10~M20
Square nut
M10~M18
SUPER-7N Hex nut
M20~M24
Square nut
M20~M24
Flange nut
Flange nut
SUPER-NF Type
Range of screw processing
SUPER-3NF M5~M10
SUPER-5NF M10~M16
SUPER-7NF M18~M24
Round nut
Round nut
SUPER-NR Type
Range of screw processing
SUPER-3NR M5~M10
SUPER-5NR M10~M16
SUPER-7NR M18~M24

SUPER-Series N Type

N Type
Model SUPER-3N SUPER-5N SUPER-7N
Range of screw processing Hex nut
M6~M12
Hex nut
M10~M20
Hex nut
M20~M24
Square nut
M6~M10
Square nut
M10~M18
Square nut
M20~M24
Nut tapping style Biaxial slide cam type / Spring pushing type
Work fixing method Turn stop type hexagonal guide
Shape of tap used
(Bent tap)
L245mm×30R L375mm×45R L520mm×65R
Tap replacement style Quick replacing type (Bent guide door close / open)
Work feeding style Hopper
Stroke setting for main shaft rotation & screw thread cutting Three stage switch (pulley belt switching)
Main shaft motor spec.
(Induction motor)
1.5KW (3 phase/4P) 3.7KW (3 phase/4P) 5.5KW (3 phase/4P)
Main shaft rotation range 950~2500rpm
[Variable diameter]
1400~2100rpm
600~1500rpm
[Variable diameter]
320~1560rpm
400~1000rpm
[Variable diameter]
260~1000rpm
Main shaft control method Inverter (Old type uses a variable diameter pulley)
Coolant pump Dip type coolant pump 180W (3 phase/2P) 400W (3 phase/2P)
Hopper driving motor (Gear motor) 100W (3 phase/4P) 400W (3 phase/4P)
Chip separator (Induction motor) 25W (3 phase/4P)
Hydraulic unit *
Control device Sequencer / digital panel meter / various lamp switches
Production counter Digital panel meter (Tap lifetime)
Failure detection items Chamfer failure / clogging / empty / doubling
Other remarks *
Main replacing parts Chute / guide / mouthpiece / bent guide back panel
Cutting lubricant tank capacity 120L 200L
Machine size 910mm×1220mm
×H1530mm
1060mm×1680mm
×H1550mm
1120mm×1900mm
×H1560mm
Machine weight 500kgs 1000kgs 1450kgs
Other standard functions *
Options / others *
Production volume per minute (for reference) *

SUPER-Series N Type

NF Type
Model SUPER-3NF SUPER-5NF SUPER-7NF
Range of screw processing M5~M10 M10~M16 M18~M24
Nut tapping style Biaxial slide cam type / Spring pushing type
Work fixing method Flange guide (Turn stopper by chip)
Shape of tap used
(Bent tap)
L250mm×30R L385mm×45R L530mm×65R
Tap replacement style Quick replacing type (Bent guide door close / open)
Work feeding style Hopper or Parts feeder
Stroke setting for main shaft rotation & screw thread cutting Three stage switch (pulley belt switching)
Main shaft motor spec.
(Induction motor)
1.5KW (3 phase/4P) 3.7KW (3 phase/4P) 5.5KW (3 phase/4P)
Main shaft rotation range 950~2500rpm
[Variable diameter]
1400~2100rpm
600~1500rpm
[Variable diameter]
320~1560rpm
400~1000rpm
[Variable diameter]
260~1000rpm
Main shaft control method Inverter (Old type uses a variable diameter pulley)
Coolant pump Dip type coolant pump 180W (3 phase/2P) 400W (3 phase/2P)
Hopper driving motor (Gear motor) 100W (3 phase/4P) 400W (3 phase/4P)
Chip separator (Induction motor) 25W (3 phase/4P)
Hydraulic unit *
Control device Sequencer / digital panel meter / various lamp switches
Production counter Digital panel meter (Tap lifetime)
Failure detection items Chamfer failure / clogging / empty / doubling
Other remarks *
Main replacing parts Chute / Flange guide / mouthpiece / bent guide back panel
Cutting lubricant tank capacity 120L 200L
Machine size 910mm×1220mm
×H1530mm
1060mm×1680mm
×H1550mm
1120mm×1900mm
×H1560mm
Machine weight 500kgs 1000kgs 1450kgs
Other standard functions *
Options / others *
Production volume per minute (for reference) *

SUPER-Series N Type

NR Type
Model SUPER-3NR SUPER-5NR SUPER-7NR
Range of screw processing M5~M10 M10~M16 M18~M24
Nut tapping style Biaxial slide cam type / Spring pushing type
Work fixing method Hydraulic chuck guide
Shape of tap used
(Bent tap)
L250mm×30R L385mm×45R L530mm×65R
Tap replacement style Quick replacing type (Bent guide door close / open)
Work feeding style Hopper or Parts feeder
Stroke setting for main shaft rotation & screw thread cutting Three stage switch (pulley belt switching)
Main shaft motor spec.
(Induction motor)
1.5KW (3 phase/4P) 3.7KW (3 phase/4P) 5.5KW (3 phase/4P)
Main shaft rotation range 950~2500rpm
[Variable diameter]
1400~2100rpm
600~1500rpm
[Variable diameter]
320~1560rpm
400~1000rpm
[Variable diameter]
260~1000rpm
Main shaft control method Inverter (Old type uses a variable diameter pulley)
Coolant pump Dip type coolant pump 180W (3 phase/2P) 400W (3 phase/2P)
Hopper driving motor (Gear motor) 100W (3 phase/4P) 400W (3 phase/4P)
Chip separator (Induction motor) 25W (3 phase/4P)
Hydraulic unit 0.75 KW (3 phase/4P)
Max. using pressure 3.5 MPa
1.5 KW (3 phase/4P)
Max. using pressure 3.5 MPa
Control device Sequencer / digital panel meter / various lamp switches
Production counter Digital panel meter (Tap lifetime)
Failure detection items Chamfer failure / clogging / empty / doubling
Other remarks *
Main replacing parts Chute / hydraulic chuck / chuck fixing board / mouthpiece / bent guide back panel
Cutting lubricant tank capacity 120L 200L
Machine size 1050mm×1220mm
×H1530mm
1160mm×1660mm
×H1580mm
1220mm×1900mm
×H1560mm
Machine weight 500kgs 1000kgs 1450kgs
Other standard functions *
Options / others *
Production volume per minute (for reference) *

Please do not hesitate to contact us
if you have any questions about products.

  • HeadTel.03-3743-5321 / Fax.03-3744-5253

    20-16 Higashi-kojiya 1-chome,
    Ota City, Tokyo 144-0033 Japan